Peak Performance Check
Peak Performance
Check
$29
What’s Included?
- AC & Furnace inspection
*OFFER EXPIRES 9/30/24. Not valid with other offers/discounts. Valid on qualifying purchases only. Offer valid for single family residential properties only. Some exclusions may apply. We have convenient financing options subject to credit approval. Some services and/or offers listed may not be available in all locations. Free Water Analysis only valid for homes without a Kinetico system. Water test includes hardness, iron, pH, tds, chlorine, and nitrates. APEX15 warranty requires ongoing use of maintenance plan throughout warranty. Please contact us for additional details. Aquarius Home Services is an Authorized, Independent Kinetico Dealer.
What’s in a
Peak Performance Check?
- Visual inspection of furnace and components
- Combustion analysis
- Clean flame sensor
- Clean drain trap
- Gauge refrigerant levels
- Visually inspect condenser
- Visually inspect evaporator coil
- Visually inspect electrical components
- Check capacitor
What’s the difference between a
Tune-up & Peak Performance Check?
- Full cleaning of AC unit with water
- Check capacitor for proper readings
- Check contactor for any signs of wear or voltage drop
- Check condenser fan motor for proper AMP draw
- Visual inspection of disconnect for proper fuses and breaker size
- Test internal condition of compressor with megaohm meter
- Test AMP draw on compressor
- Visual inspection of all wiring and connections in condenser
- Visual inspection or line-set insulation
- Visual inspection of UV wrap on line-set
- Make sure AC unit is level
- Visual inspection of blower wheel in furnace/ air handler
- Check blower motor AMP draw in furnace/ air handler
- Check and flush all drain lines if needed
- Visual inspection of evaporator coil above furnace/ air handler
- Visual inspection of ductwork
- Check refrigerant charge for proper sub-cool/ super heat
- Check thermostat operation (changing batteries is add'l charge)
- Check temperature split in-house
- Clean burners & flame sensor
- Check for proper micro-amps, test resistance, and visually inspect ignitor
- Visually inspect heat exchanger with camera
- Visually inspect secondary heat exchanger with camera
- Check thermostat and change batteries if needed (batteries are an additional charge)
- Check for clear intake & exhaust
- Check fresh air intake for home
- Clean drain trap
- Flush drain lines
- Test all pressure switches
- Test limit switch
- Visually inspect circuit board
- Test amp draw on inducer motor
- Check static pressures on system duct work
- Check amp draw on blower motor
- Inspect blower wheel
- Check gas pressures
- Check for any gas leaks & perform combustion analysis
- Visually inspect evaporator coil
- Inspect any UV light, humidifier, air to air exchanger, HEPA unit or air filters on unit
- Visual inspection of furnace and components
- Combustion analysis
- Clean flame sensor
- Clean drain trap
- Gauge refrigerant levels
- Visually inspect condenser
- Visually inspect evaporator coil
- Visually inspect electrical components
- Check capacitor
Preventive Maintenance for your Comfort Systems
Annual maintenance is key for your heating & cooling system to operate at maximum efficiency and lower energy bills.
Your equipment has to work harder if it’s not properly tuned and will cost more to operate during the peak seasons.
If you have older equipment, keeping energy costs down with a tune-up from a qualified HVAC technician is crucial.
Current Promotions
Schedule Maintenance With Aquarius Today!
Keep the heat on this winter and avoid an emergency furnace repair call on one of the coldest days of the year.